SI24 Marble No Etching Matte Coating Kit, 50 ml / 1.7 oz

SI24 Marble No Etching Matte Coating Kit, 50 ml / 1.7 oz

$185.00
Skip to product information
SI24 Marble No Etching Matte Coating Kit, 50 ml / 1.7 oz
  • SI24 Marble No Etching Matte Coating Kit, 50 ml / 1.7 oz
  • SI24 Marble No Etching Matte Coating Kit, 50 ml / 1.7 oz
SI24 Marble No Etching Matte Coating Kit, 50 ml / 1.7 oz
SI24BKIT

SI24 Marble No Etching Matte Coating Kit, 50 ml / 1.7 oz

$185.00

Matte no-etching protection for marble, granite, and laminated hard surfaces.

SI24 is a matte hard-surface coating made for marble, granite, varnished wood, and PVC-laminated countertops and tabletops. It creates a durable hydrophobic barrier that helps resist chemical etching, repel water and dirt, and keep surfaces easier to clean. It can also help refresh weathered marble.
  • H9 hardness
  • Matte finish
  • Hydrophobic protection
  • UV resistance
  • Easier cleaning
  • Chemical resistance

Hardness

H9

Durability

Near-permanent

Temperature Resistance

Up to 850°C

Surface Compatibility
  • Marble
  • Granite
  • Laminated table tops
  • PVC or vinyl laminate
  • Varnished wood

Coverage

50 ml covers up to 5 m² / 50 ft².
Typical consumption is 10 ml/m² or 0.034 oz/ft².

What It Protects Against

Chemical etching, water, dirt, UV exposure, light scratching, and everyday surface wear

Finish

Matte

Thickness

6 microns

How to Apply

  1. Clean the surface thoroughly.
  2. Sterilize / final-clean the surface.
  3. Apply a thin, even layer with the cotton pad.
  4. Allow it to cure fully before regular use.

Important Prep Notes

Apply only to a clean, dry surface in new or like-new condition. Remove all grease, residue, and contamination before application. Once fully cured, SI24 can only be removed by machine polishing. Use below 70% relative humidity. Full cure takes about 5 days.Surface must be fully clean and completely dry before application. Wear nitrile gloves. For best results, use Steril Cleaner first and remove all contamination, grease, residue, or mineral buildup so the coating can bond correctly. If spraying instead of wiping, keep humidity below 65% and properly scuff / filter / prep the surface first.

What's Included

1 x 50 ml / 1.7 oz SI24 coating
1 x microfiber towel
6 x cotton pads
1 x dripper plug
1 x pair nitrile gloves

You may also like